Happymodel CINE8 85mm Brushless Cinewhoop DIY KIT EX1202.5 KV8000 MCU upgraded to EFM8BB21 5.8G 400mw VTX ANT 1200tvl

Happymodel CINE8 85mm Brushless Cinewhoop DIY KIT EX1202.5 KV8000 4in1 ESC MCU upgraded to EFM8BB21 5.8G 400mw VTX Caddx ANT 1200tvl camera

Happymodel CINE8 85mm Brushless Cinewhoop DIY KIT 
This Kit is very easy to build , no solder work any more, just assemble then plug and play .  

Very cheap but equipped with high-performance and stable components. The frame is formed by high-precision TPU 3D printing, fixed with carbon fiber board and the use of integral foam to prevent collision. Every FPV pilots could enjoy the fun of building their own FPV Cinewhoop.

Features:
No Solder work need and easy to build
Very reliable and resistant to drops
Stable and smooth flying
Insta360 fixed mount ready 
Smooth and powerful 

Diversity SPI Receiver compatible Frsky/S-FHSS/Redpine protocol

Specifications：
Brand Name: Happymodel
Item Name: Cine8
Wheelbase: 85mm
Size: 145mmx140mmx23mm
Weight: 73g(without battery)
Weight: 99g(with Insta360)
Receiver option:
Internal SPI Frsky version (Compatible with Frsky ACCST D8/D16, S-FHSS, Redpine)
External Flysky Fli14+ receiver version(Compatible with Flysky AFHDS-2A protocol radio)
External Speki+ receiver version(Compatible with Spektrum DSM2/DSMX protocol radio)
External TBS Crossfire Nano receiver version

Package includes:
Cine8 Frame*1
Option1: CrazybeeF4 V3.1 SPI Receiver version compatible FrskyD8/D16 S-FHSS*1
Option2: CrazybeeF4 V3.1 with External Fli14+ receiver*1
Option3: CrazybeeF4 V3.1 with External DSMX receiver*1
Option4: CrazybeeF4 V3.1 with External TBS crossfire nano receiver*1
Happymodel EX1202.5 KV8000 brushless motor*4
Gemfan D51(2020-4) Cinewhoop Props*1
Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera*1
5.8G 25mw~400mw Whoop_VTX_HP*1
TypeC USB Adapter*1
Tattu 3S 11.4V 450mah battery*1
Note:Insta360 go is not include.

Motor:
Mode: EX1202.5 KV8000
Configu-ration:9N12P
Stator Diamter:12mm
Stator Length:2.5mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ14mm*14.5mm
Weight(g):4.4g
No.of Cells(Lipo):2-3S

Propellers:
Material:PC
Weight:0.91g
Pitch:2in
Props Dia:50.3mm
Center Thickness:4.5mm
Center Hole Dia:1.5mm 3 holes

Flight controller:
(Frsky SPI RX version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR
(S-FHSS SPI RX version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR
(Redpine SPI RX version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR
(External Flysky Fli14+ RX version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR
(External Speki+ RX version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR
(External TBS CRSF NANO version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 2-4S battery input (DC 2.9V-8.7V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5V 1A BEC

Onboard 4in1 ESC:
MCU upgraded to EFM8BB21
Power supply: 2-4S LiPo/LiPo HV (7v/17v)
Current: 12A continuous peak 15A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: F_H_40_REV16_8.HEX
Default protocol: DSHOT600

Onboard Frsky SPI D8 receiver Version:
CC2500 Hardware
Compatible with FrskyD FrskyX Frsky_X_LBT SFHSS REDPINE protocol
Channels: 8ch
Failsafe support
Diversity 2.4G receiver system
No ground interference: above 300meter

External Flysky Fli14+ receiver:
Channel: 14
Protocol: AFHDS-2A
2.4G Mode: The second generation of an enhanced version of the automatic FM digital system
Antenna Length: 50mm  (single antenna)
Input Power: 4.0-6.5V DC
Weight: Only 1g
Size: 19.5mm*12mm*5mm
Color: Black
Signal Output: IBUS
RSSI Output: Channel14
No ground interference: >500m

External Speki+ receiver:
Dimension: 20mm*12.4mm*5mm
Support protocol: DSM2/DSMX
Output Signal configuration: SRXL(Set Spektrum2048/SRXL for the serial receiver provider)
Antenna connector: I-PEX MHF3
Antenna length: 70mm
Input voltage: 3.6v~13v
Input current: 100ma
Channels: Max12ch(usually channel 12 is used for RSSI)

External TBS CRSF Nano receiver:
Original TBS CROSSFIRE Receiver  ,CRSF Protocol , Official TBS transmitter compatible

5.8G 400mw VTX:
Output power: 25mw~400mw switchable
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 400mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race band 
SmartAudio ready

Caddx ANT 1200tvl camera:
Image Sensor: 1/3" CMOS Sensor
Horizontal Resolution: 1200 TVL
TV System: NTSC or PAL 
IMAGE: 16:9 or 4:3
Synchronization: Internal
Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000

S/N Ratio : >52dB (AGC OFF)
Video Output: CVBS
Lens: 1.8mm
Min. Illumination: [email protected]
Auto Gain Control: YES
BLC: YES
WDR: Global WDR
DNR: 3D DNR
Dimensions: 14*14mm(with bracket to 19*19mm)
Wide Power Input: DC 3.7-18V
Work Temperature: -20℃~+60℃
Weight: 2g (N.W.)

Jumper T-Lite 16CH Hall Sensor Gimbals CC2500/JP4IN1 Multi-protocol RF System OpenTX Mode2 Transmitter Support Jumper 915 R900/CRSF Nano for RC DroneDescription: Brand Name: JumperItem Name: T-LiteSize:166*106*56mmWeight: 260g (with 18650)Voltage: DC3 5-4. 2VBattery: 1×18650(Battery not included)Channel: 16chExternal Micro SD Card: resered SD card slotFeatures:STM32F205 MCUOpentx firmwareScreen:1.3''12864High quality hall sensor gimbalsInternal Multi-protocol moduleISupport Jumper 915 module (sell seperately) compatiable with Jumper R900 series receivers, Frsky R9 series receivers,full speed TBS NANO Crossfire supportedBuilt in USB-C chargingVoice and Vibration function

Package included:1x T-LITE  Transmitter

5.8GHz FPV drone video wireless transmission

 

5.8GHz RX

 

Features:

1.4.3inch LCD wireless receiver monitor.

2.48ch, 6-band frequency.

3.CNC aluminum bracket, easy to install remote control.

4. Automatic search frequency.

5. Built-in battery design.

6. Working status OSD display: battery indication and channel indication.

7. Multi-language operation: support Russian, English, Chinese, German, Spanish.

8. Support dual-screen display of flight images, without delaying the flight of the aircraft, synchronizing WIFI video to the mobile phone to share the experience.

   Full channel reception, high definition, high receiving sensitivity, support for wearing VR, experience the flight experience of the aircraft.

 

 

 

specification:

Screen size: 4.3 inches

Resolution: 480*22 pixels

Aspect ratio: 16:9

Brightness: 500 discs / M2

Video format: NTSC/PAL

Working voltage: 5V

Work number: 500 mAh

Working status OSD display: battery indication, channel does not work

Built-in rechargeable battery: 650MAH

Working time: 2 hours

Sensitivity: -90DBM

Frequency range: 5645MHZ-5945MHZ

Channel: 48 channels

A key search frequency: button control instead of switch