Brand New Radiolink 4ch 6ch 8ch 12ch Receiver R6DS R6DSM R8EF R8FM R9DS R12DS R12DSM R4F R4FG R7FG byme A D flight controller
$25.87 - $41.95
Radiolink R6DSM, 2.4G 10 channels receiver
DSSS and FHSS spread spectrum working synchronously
Only 1 gram weight
SBUS and PPM signal support, use for Radiolink transmitters AT9,AT9S,AT10 and AT10II, is the best choice for racing drone.
Specification:
) Channels: 10 channels
) Working voltage: 4.8-6V
) Working current: 38-45mA(input voltage: 5V)
) Size: 15*13 MM
) Weight: 1g
) Detachable antenna
) 4096 section precision, 0.25us per section, servo anti-shake rudder.
) Control distance: about 600 meters, actually control distance depends on the environment.
R12DSM:
Please note of fixed wing and helicopter user:
R12DSM should be used with the Flight Controller supporting S.BUS or PPM, R12DSM can not support PWM (Pulse Width Modulation, 1 cable 1channel connection)
Receiver model: R12DSM
Size: 30*15mm
Weight:2.5g
Channel: 10,12 channel compatible
Signal: S-BUS&PPM
Working Voltage: 4.8-6V
Working electricity: 40-180mA(Input Voltage 5V)
Antenna Length: About 9cm
Disctan(About): Ground 1100M, Midair 4000M,The actual operating distance is related to the flight environment.
Suitable RC Remote control model: AT9, AT9S,AT10, AT10II
Communication: DSSSS and FHSS Dual-spread anti-interference technology
R6DSM
Please note of fixed wing and helicopter user:
R6DSM should be used with the Flight Controller supporting S.BUS or PPM, R12DSM can not support PWM (Pulse Width Modulation, 1 cable 1channel connection)
Two signal working mode:
Blue/purple LED, SBUS signal , 10 channels totally.
Red LED always, PPM signal, 10 channels totally.
Technical Parameters
1) Channels: 10 channels
2) Working voltage: 4.8-6V
3) Working current: 38-45mA (input voltage: 5V)
4) Size: 15*13 MM
5) Weight: 1g
6) Detachable antenna
7) 4096 section precision, 0.25us per section, servo anti-shake rudder.
8) Control distance: about 600 meters, actually control distance depends on the environment.
R6DS:
Profuct Features:
Radiolink R6DS, 2.4G 6 channels receiver, DSSS and FHSS spread spectrum working synchronously, use for Radiolink transmitters AT9, AT9S and AT10 AT10II. SBUS, PPM and PWM signal possible working at the same time.
Technical Parameters:
1. Channels: Red LED indicator is for PWM mode. Blue LED for SBUS/PPM, can be extended to 10 channels.
2. Power input: MAX 6V
3. Control distance: 600 meters air, or even farther beyond your sight
4. Current consumption: 38-45mA (5V)
5. Size: L×W=25×15mm
6. Weight: 3.4 grams
7. Precision: 4096
R12DS:
Product Features:
​Radiolink R12DS, 2.4G 12 channels receiver, DSSS and FHSS spread spectrum working synchronously, compatible with Radiolink transmitters AT9, AT9S, AT10 and AT10II.
S-BUS and PWM signal working at the same time.
Two signal working mode:
(1)PWM signal output working mode: red LED indicates PWM signal output, 11 channels Totally.
(2) S-BUS signal output working mode: blue/purple LED indicates S-BUS signal output, 12 channels totally.
S-BUS and PWM signal working at the same time. S-BUS signal channel(3 pin of row 11) output 12 channels S-BUS signal, PWM signal channels(3 pin of row 1 to row 10) output CH3 to CH12 PWM signals, but 12 channel in total. How many PWM signal channels you can use depends on how many S-BUS signal channels you have used(e.g: you have use 4 S-BUS signal channels, then you have 8 PWM signal channels to use).
Technical Parameters:
1) Channels: 12 channels: output 12 channels signal, support S-BUS and PWM signal output synchronously.
2) Working voltage: 4.8-10V
3) Working current: 38-45mA (input voltage: 5V)
4) Size: 50*31.5*14.5 MM
5) Weight: 14g
6) Receiver integrate telemetry sensor including signal strength and voltage. Support extended engine voltage telemetry module PRM-01 and module PRM-02 can feedback GPS info, Speed, voltage etc. on AT9/AT9S/AT10/AT10II display when work with flight controller APM or PIX.
7) 4096 section precision, 0.25us per section, servo anti-shake rudder.
8) Control distance: about 4 kilometers air (Maximum range tested in unobstructed areas free of interference and may vary depending on local regulations).
How to match code with transmitter:
1. Put the transmitter and the receiver close to each other within 1 meters.
2. Turn on the transmitter and make sure the transmitter Red&Green Indicator light bright at the same time, then power on the Receiver.
3. Connect CH3 of Receiver to ESC 5V.
4. There is a black button on the Receiver, use a thin stick keep press the button two seconds, receiver light starts blinking, after about blinking 8 times, match code success and receiver signal LED always on!
Installment of receiver antenna:
1.The antenna must be kept as straight as possible. Otherwise it will reduce the effective range.
2.Large model aircraft may has some metal part interfering signal; in this case the antennas should be placed at both sides of the model. Then the best RF signal condition is obtained at any flying attitude.
3.The antennas must be kept away from conductive materials, such as metal and carbon. at least a half inch. The coaxial part of the antennas does not need to follow these guidelines, but do not bend it in a small radius.
4.Keep the antennas away from the motor, ESC, and other noise sources as far as possible.
5.The receiver can be packed by sponge or foam for shockproof when it is installed to the model. After all of the above steps were finished, turn off the transmitter and then power it on, now the program functions to assure it under control of transmitter with a right connection.
​
Brand New Radiolink 4ch 6ch 8ch 12ch Receiver R6DS R6DSM R8EF R8FM R9DS R12DS R12DSM R4F R4FG R7FG byme A D flight controller
Related products
Remote Control Toys
$349.55
Remote Control Toys
$339.30 - $500.10
Remote Control Toys
$389.95 - $687.43
Remote Control Toys
$210.82 - $232.73
Remote Control Toys
$31.00 - $77.10
Remote Control Toys
$233.17 - $293.47